Taajuuskorjaimet

Lataa tuotteita

preload spinner
7 tuotteet

dbx 215S 2x15-kaistainen graafinen taajuuskorjain 215S 2x15-kaistainen graafinen taajuuskorjain

Input Connectors 1/4" TRS, female XLR (pin 2 hot)
Input Type Electronically balanced/unbalanced, RF filtered
Input Impedance Balanced 40 kOhm, unbalanced 20 kOhm
Max Input >+21dBu balanced or unbalanced
CMRR >40dB, typically >55dB at 1kHz
Output Connectors 1/4" TRS, male XLR (pin 2 hot)
Output Type Impedance-balanced/unbalanced, RF filtered
Output Impedance Balanced 100 ohm, unbalanced 50 ohm
Max Output >+21dBu balanced/unbalanced into 2 kOhm or greater; >+18dBm balanced/unbalanced (into 600 ohm)
Bandwidth 20Hz to 20kHz, +0.5/-1dB
Frequency Response <10Hz to >50kHz, +0.5/-3dB
Dynamic Range Typically >112dB
Signal to Noise Ratio Typically >95dB
THD+Noise <0.003%
Interchannel Crosstalk <-90db, 20Hz to 20kHz
Bypass Switch Bypasses the graphic equalizer section in the signal path
Low cut Switch Activates the 50Hz 12dB/octave Bessel high-pass filter
Range Switch Selects either +/- 6dB or +/- 12dB slider boost/cut range
Operating Voltage 100VAC-240VAC 50/60Hz
Power Consumption 15W
Power Connector IEC receptacle
Unit Weight 4.8 lbs.(2.2 kg)
Shipping Weight 6.2 lbs.(2.8kg)
Dimensions 1.75" (4.4cm) H x 6"(15.24cm) D x 19" (48.26cm) W
    

€ 176

€ 165

Erikoistuote
Toimitetaan 5-8 arkipäivässä

dbx 231S 2x 31-kaistainen graafinen taajuuskorjain (Graphic Equaliser)

Input Connectors 1/4" TRS, female XLR (pin 2 hot)
Input Type Electronically balanced/unbalanced, RF filtered
Input Impedance Balanced 40k ohm, unbalanced 20k ohm
Max Input >+21dBu balanced or unbalanced
CMRR >40dB, typically >55dB at 1kHz
Output Connectors 1/4" TRS, male XLR (pin 2 hot)
Output Type Impedance-balanced/unbalanced, RF filtered
Output Impedance Balanced 100 ohm, unbalanced 50 ohm
Max Output >+21dBu balanced/unbalanced into 2k ohm or greater; >+18dBm balanced/unbalanced (into 600 ohm)
Bandwidth 20Hz to 20kHz, +0.5/-1dB
Frequency Response <10Hz to >50kHz, +0.5/-3dB
Dynamic Range Typically >112dB
Signal to Noise Ratio Typically >95dB
THD+Noise <0.003%
Interchannel Crosstalk <-90dB, 20Hz to 20kHz
Bypass Switch Bypasses the graphic equalizer section in the signal path
Low cut Switch Activates the 50Hz 12dB/octave high-pass filter
Range Switch Selects either +/- 6dB or +/-12dB slider boost/cut range
Operating Voltage 100-240VAC 50/60Hz
Power Consumption 15W
Power Connector IEC receptacle
Unit Weight 6.2 lbs.(2.81 kg)
Shipping Weight 7.9 lbs.(3.58kg)
Dimensions 3.5" (8.9cm) H x 6"(15.24cm) D x 19" (48.26cm) W
    

€ 189

€ 177

Erikoistuote
Toimitetaan 2-4 työpäivä

dbx 131S 31-kaistainen graafinen taajuuskorjain

Input Connectors 1/4" TRS, female XLR (pin 2 hot)
Input Type Electronically balanced/unbalanced, RF filtered
Input Impedance Balanced 40k ohm, unbalanced 20k ohm
Max Input >+21dBu balanced or unbalanced
CMRR >40dB, typically >55dB at 1kHz
Output Connectors 1/4" TRS, male XLR (pin 2 hot)
Output Type Impedance-balanced/unbalanced, RF filtered
Output Impedance Balanced 100 ohm, unbalanced 50 ohm
Max Output >+21dBu balanced/unbalanced into 2k ohm or greater; >+18dBm balanced/unbalanced (into 600 ohm)
Bandwidth 20Hz to 20kHz, +0.5/-1dB
Frequency Response <10Hz to >50kHz, +0.5/-3dB
Dynamic Range Typically >112dB
Signal to Noise Ratio Typically >95dB
THD+Noise <0.003%
Interchannel Crosstalk <-90dB, 20Hz to 20kHz
Bypass Switch Bypasses the graphic equalizer section in the signal path
Low cut Switch Activates the 50Hz 12dB/octave high-pass filter
Range Switch Selects either +/- 6dB or +/-12dB slider boost/cut range
Operating Voltage 100-240VAC 50/60Hz
Power Consumption 15W
Power Connector IEC receptacle
Unit Weight 4.8 lbs.(2.2 kg)
Shipping Weight 6.2 lbs.(2.8kg)
Dimensions 1.75" (4.4cm) H x 6"(15.24cm) D x 19" (48.26cm) W

 

    

€ 176

€ 160

Erikoistuote
Toimitetaan 2-4 työpäivä

Omnitronic GEQ-2150 2x 15-kaistainen graafinen taajuuskorjain

  • Power supply: 230 V AC, 50 Hz
    Power consumption: 13 W
    Power connection: Mains input IEC connector (M) mounting version Power supply cord with safety plug (provided)
    Frequency range: 20 - 20000 Hz
    S/N ratio: >96 dB
    Impedance: Input 20 kOhm , bal.
      Input 15 kOhm , unbal.
      Output 300 kOhm , bal.
      Output 150 kOhm , unbal.
    Gain: Output: - ∞ to + 6 dB
    Equalizer: master: 2 x Graphic equalizer 15-band
    centre frequency: ISO standard, 2/3 octave, 25/40/63/100/160/250/400/630 Hz, 1/1,6/2,5/4/6,3/10/16 kHz
    Control range: ±6dB, ±12dB, switchable
    Connections: Input: 2 x line via 3-pin XLR
      Input: 2 x line via 6.3 mm plug (unbal.)
      Output: 2 x line via 3-pin XLR
      Output: 2 x line via 6.3 mm plug (unbal.)
    Max. level: Input: +24 dBu, bal.
      Input: +18 dBu, unbal.
      Output: +24 dBu, bal.
      Output: +18 dBu, unbal.
    Distortion: <0.05 %
    Housing design: (19") 48.3 cm rack installation 1 U
    Width: 48.3 cm
    Height: 4.45 cm
    Depth: 22 cm
    Weight: 2.40 kg
    

 

€ 135

Erikoistuote
Toimitetaan 5-8 arkipäivässä

dbx 1215 2x 15-kaistainen graafinen taajuuskorjain

Input Connectors 1/4" TRS, female XLR (pin 2 hot), and barrier terminal strip
Input Type Electronically balanced/unbalanced, RF filtered
Input Impedance Balanced 40 kOhm, unbalanced 20 kOhm
Max Input >+21dBu balanced or unbalanced
CMRR >40dB, typically >55dB at 1kHz
Output Connectors 1/4" TRS, male XLR (pin 2 hot), and barrier terminal strip
Output Type Impedance-balanced/unbalanced, RF filtered
Output Impedance Balanced 200 ohm, unbalanced 100 ohm
Max Output >+21dBu balanced/unbalanced into 2 kOhm or greater; >+18dBm balanced/unbalanced (into 600 ohm)
Bandwidth 20Hz to 20kHz, +0.5/-1dB
Frequency Response <10Hz to >50kHz, +0.5/-3dB; +/-15dB range; +/-6dB range
Dynamic Range 109dB; 115dB
Signal to Noise Ratio 90dB, 97dB
THD+Noise <0.005%
Interchannel Crosstalk <-80db, 20Hz to 20kHz
Bypass Switch Bypasses the graphic equalizer section in the signal path
Low cut Switch (recessed) Activates the 40Hz 18dB/octave Bessel high-pass filter
Range Switch (recessed) Selects either +/- 6dB or +/- 15dB slider boost/cut range
I/O Meter 4-LED bar graph (Green, Green, Yellow, Red) at -10, 0, +10, and +18dBu
Indicators EQ Bypass (Red); Clip (Red); Low Cut (Red); +/-6dB (Yellow); +/-15dB (Red)
Operating Voltage 100VAC 50/60Hz; 120VAC 60Hz; 230VAC 50/60Hz
Power Consumption 24W
Power Connector IEC receptacle
Dimensions 3.5" H X 19" W X 7.9" D (8.9cm x 48.3cm x 20.1cm)
Unit Weight 8.5 lbs. (3.9 kg)
Shipping Weight 9.5 lbs. (4.3 kg)

 

    

 

€ 323

Ennakkotilaus viikko 20

dbx 1231 2x 31-kaistainen graafinen taajuuskorjain

Input Connectors 1/4" TRS, female XLR (pin 2 hot), and barrier terminal strip
Input Type Electronically balanced/unbalanced, RF filtered
Input Impedance Balanced 40 kOhm, unbalanced 20 kOhm
Max Input >+21dBu balanced or unbalanced
CMRR >40dB, typically >55dB at 1kHz
Output Connectors 1/4" TRS, male XLR (pin 2 hot), and barrier terminal strip
Output Type Impedance-balanced/unbalanced, RF filtered
Output Impedance Balanced 200 ohm, unbalanced 100 ohm
Max Output >+21dBu balanced/unbalanced into 2 kOhm or greater; >+18dBm balanced/unbalanced (into 600 ohm)
Bandwidth 20Hz to 20kHz, +0.5/-1dB
Frequency Response <10Hz to >50kHz, +0.5/-3dB; +/-15dB range; +/-6dB range
Dynamic Range 109dB; 115dB
Signal to Noise Ratio 90dB, 97dB
THD+Noise <0.005%
Interchannel Crosstalk <-80db, 20Hz to 20kHz
Bypass Switch Bypasses the graphic equalizer section in the signal path
Low cut Switch (recessed) Activates the 40Hz 18dB/octave Bessel high-pass filter
Range Switch (recessed) Selects either +/- 6dB or +/- 15dB slider boost/cut range
I/O Meter 4-LED bar graph (Green, Green, Yellow, Red) at -10, 0, +10, and +18dBu
Indicators EQ Bypass (Red); Clip (Red); Low Cut (Red); +/-6dB (Yellow); +/-15dB (Red)
Operating Voltage 100VAC 50/60Hz; 120VAC 60Hz; 230VAC 50/60Hz
Power Consumption 24W
Power Connector IEC receptacle
Dimensions 5.25" H X 19" W X 7.9" D (13.4cm x 48.3cm x 20.1cm)
Unit Weight 10.6 lbs.
Shipping Weight 11.6 lbs.

 

    

 

€ 426

Erikoistuote
Toimitetaan 5-8 arkipäivässä

dbx iEQ31 2x 31-kaistainen graafinen taajuuskorjain/Limiter

Tuloliittimet 1/4" TRS, naaras XLR (nasta 2 kuuma) ja Euroblock.
Tulotyyppi Elektronisesti balansoitu/epäsymmetrinen, RF-suodatettu.
Insert-impedanssi Tasapainotettu 40k ohmia, epäsymmetrinen 20k ohmia.
Maksimi sisääntulo >+22dBu symmetrinen tai balansoimaton
CMRR >40dB, tyypillisesti >55dB 1kHz:ssä
Lähtöliittimet 1/4" TRS, uros XLR (nasta 2 kuuma) ja Euroblock -liittimet
Lähtötyyppi Aktiivinen balansoitu/epätasapainotettu, RF-suodatettu.
Lähtöimpedanssi Tasapainotettu >120 ohmia, epäsymmetrinen >60 ohmia.
Maksimi ulostulo >+20dBu symmetrinen/epäsymmetrinen 2k ohmiin tai yli.
Taajuusvaste 20Hz - 20kHz, +0,5/0,25dB
Dynaaminen alue >113dB, A-painotettu
THD+kohina <0,003%, tyypillinen +4dBu:lla, 1kHz:n taajuudella.
Kanavien välinen Crosstalk <-80dB, 20Hz - 20kHz:n taajuudet
Kohinanvaimennus Jopa 10dB dynaaminen laajakaistakohinan vähennys
Digitaalinen resoluutio 24 bittiä
Näytteenottotaajuus 48 kHz
Viive 2msec
Käyttöjännite 120VAC 60Hz, 220/240VAC 50/60Hz.
Virrankulutus 17 wattia
Virtaliitin IEC-liitäntä
Mitat 3,5" korkeus x 19" leveys x 7,9" syvyys

 

    

 

€ 778

Erikoistuote
Toimitetaan 2-4 työpäivä

Lataa tuotteita

preload spinner
/upload_dir/templates/SSXL2024_oktober_speedy
Chatbot Profile Image

AI-avustaja

 
Saatavilla nyt
Voin tehdä virheitä. Harkitse tärkeiden tietojen tarkistamista.
fetchingConversationWaitText
Älä jaa arkaluonteisia henkilötietoja.